中国散裂中子源主剥离膜热效应分析

doi:10.7538/yzk.2013.47.10.1867

摘要/Abstract

摘要：

主剥离膜是中国散裂中子源（CSNS）快循环同步加速器的关键设备之一。正常工况下，膜片上产生的高温与其他热效应是影响剥离膜寿命的主要因素。为预测膜片的工况，选择合理的设计方案，利用有限元分析软件计算了CSNS-Ⅰ期工程中主剥离膜在不同工况下的温升、热应力和热变形。仿真结果显示，膜片上最高温度为1450 K；固定方式对热应力、热变形影响不大。根据仿真结果，最终设计膜库的备用膜片数为20片，膜片的固定方式为双边固定。

关键词: 剥离膜, 温度, 热应力, 热变形

Abstract:

Primary stripper foil device is one of the most important devices in rapid cycling synchrotron of China Spallation Neutron Source (CSNS). In normal operation conditions, the high temperature and other thermal effects on foil are the main factors which influence the foil’s lifetime. In order to predict the foil’s working conditions and choose an appropriate design scheme, the finite element analysis software was utilized to calculate the foil’s temperature, thermal stress and deformation in different working conditions of CSNS-Ⅰ. The simulation result shows that the highest temperature on foil is 1450 K, and the mounting mode would hardly affect the thermal stress and deformation. Based on the simulation result, the final spare foil’s number is designed to be 20, and the two-edge fixed method is utilized as the foil’s mounting scheme.

Key words: stripper foil, temperature, thermal stress, thermal deformation

何哲玺;邱静;李春华;屈化民;邹易清. 中国散裂中子源主剥离膜热效应分析[J]. 原子能科学技术, 2013, 47(10): 1867-1871.

HE Zhe-xi;QIU Jing;LI Chun-hua;QU Hua-min;ZOU Yi-qing. Analysis of Thermal Effect for China Spallation Neutron Source Primary Stripper Foil[J]. Atomic Energy Science and Technology, 2013, 47(10): 1867-1871.

参考文献

［1］WEI J, CHEN H S, CHEN Y W, et al. China Spallation Neutron Source: Design, R&D, and outlook［J］. Nuclear Instruments and Methods in Physics Research A, 2009, 600: 10-13.
［2］CHOU W, KOSTIN M, TANG Z. Stripping efficiency and lifetime of carbon foils［J］. Nuclear Instruments and Methods in Physics Research A, 2008, 590: 1-12.
［3］LIAW C J, LEE Y Y, ALESSI J, et al. Calculation of the maximum temperature on the carbon stripping foil of the spallation neutron source［C］∥Proceedings of Particle Accelerator Conference. New York: IEEE, 1999: 3000-3002.
［4］BEEBE WANG J, LEE Y Y, RAPARIA D, et al. Injection carbon stripping foil issues in the SNS accumulator ring［C］∥Proceedings of Particle Accelerator Conference. Chicago: IEEE, 2001: 1508-1510.
［5］SUGAI I, TAKEDA Y, OYAIZU M, et al. Double-layer effects on the lifetime of newly developed HBC-foils for RCS of J-PARC［J］. Nuclear Instruments and Methods in Physics Research A, 2010, 613: 457-461.
［6］PLUM M A, COUSINEAU S M, GALAMBOS J, et al. SNS injection foil experience［C］∥Proceedings of HB 2010. Morschach: ［s. n.］, 2010: 334-337.
［7］DROZHDIN A I, RAKHNO I L, STRIGANOV S I, et al. Modeling multiturn stripping injection and foil heating for high intensity proton drivers［J］. Physical Review Special Topics：Accelerators and Beams, 2012, 15: 011002.
［8］MARSHALL A L, NORTON F J. Carbon vapor pressure and heat of vaporization［J］. Journal of the American Chemical Society, 1950, 72: 2166-2171.
［9］MILLER S A, JOLIVET C S, STONER J O. New methods for testing cyclotron carbon stripper foils［J］. Nuclear Instruments and Methods in Physics Research A, 2008, 590: 57-65.
［10］JOLIVET C S, MILLER S A, STRNER J O, Jr, et al. Carbon stripper foils held in place with carbon fibers［J］. Nuclear Instruments and Methods in Physics Research A, 2008, 590: 47-50.
［11］YASUHIRO T, MICHIKAZU K, JYUNICHIRO K, et al. Exchange and observation systems for charge stripper foils at the J-PARC 3 GeV-RCS［J］. Nuclear Instruments and Methods in Physics Research A, 2008, 590: 213-220.
［12］JOLIVET C S, STRNER J O, Jr. Mounting stripper foils on forks for maximum lifetime［J］. Nuclear Instruments and Methods in Physics Research A, 2008, 590: 51-56.
［13］BERGER M J, COURSEY J S, ZUCKER M A, et al. Stopping power and range table for electrons, protons, and helium ions［G/OL］. Gaithersburg: The National Institute of Standards and Technology, Physical Measurement Laboratory. ［2012-02-23］. http:∥physics.nist.gov/PhysRefData/Star/Text/contents.html.

[1]	雷文明, 李京伦, 艾宪芸, 肖无云, 张济鹏, 肖雄, 张斌, 赵玮, 王英. SiPM-GAGG(Ce)探测器γ能谱稳谱方法研究[J]. 原子能科学技术, 2023, 57(7): 1425-1434.
[2]	王文辉, 朱盈喜, 佘禄超, 刘海涵, 王林. 新型氟化反应器设计及温度场模拟[J]. 原子能科学技术, 2023, 57(5): 931-938.
[3]	时运达, 孙征, 杨睿, 胡彬和, 安伟健, 赵守智. TOPAZ-Ⅱ反应堆慢化剂正温度效应研究[J]. 原子能科学技术, 2023, 57(3): 583-590.
[4]	李萍, 史建峰, 郭亚山, 王海香, 薛克敏. Zr-Sn-Nb-Fe合金两相区流变行为与本构模型研究[J]. 原子能科学技术, 2023, 57(3): 609-618.
[5]	白清城, 谢添舟, 张妍, 陈鑫, 李莹, 肖章, 张婷. 矩形窄缝通道内再淹没过程骤冷温度研究[J]. 原子能科学技术, 2022, 56(zengkan1): 19-24.
[6]	赵鹏飞, 梁田, 陈波, 马颖澈, 刘奎. 稀土元素Gd对2308双相不锈钢热变形行为的影响[J]. 原子能科学技术, 2022, 56(8): 1671-1681.
[7]	李莹, 王金宇, 陈鑫, 黄彦平, 袁德文, 毕景良, 徐建军. 圆管通道底部再淹没过程实验研究[J]. 原子能科学技术, 2022, 56(6): 1180-1187.
[8]	张振国, 李小畅, 谭思超, 田瑞峰, 刘思超, 张凤奎. 钠冷快堆直流蒸汽发生器跨尺度耦合分析[J]. 原子能科学技术, 2022, 56(11): 2354-2364.
[9]	杨新异, 朱高凡, 赵彦云, 黄群英. 高温退火温度对ODS-316L钢微观组织的影响[J]. 原子能科学技术, 2022, 56(1): 177-185.
[10]	张克乾, 张华, 胡石林, 唐占梅. 温度、水化学环境及冷加工程度对321不锈钢应力腐蚀裂纹扩展速率的影响[J]. 原子能科学技术, 2021, 55(zengkan): 129-135.
[11]	周道辉, 苏冬萍, 王孝强, 雷浩, 罗婷, 梁帮宏, 匙芳廷, 张劲松, 陈云明, 甘泉. 聚乙烯醇基可剥离膜去除不锈钢表面放射性污染的研究[J]. 原子能科学技术, 2021, 55(9): 1650-1655.
[12]	孙世妍, 张佑杰, 郑艳华, 夏冰. 高温气冷堆热工分析模型改进与堆芯温度场分析[J]. 原子能科学技术, 2021, 55(8): 1376-1385.
[13]	王瑾, 贺新福, 曹晗, 王东杰, 豆艳坤, 杨文. BCC-Fe中螺位错与［010］间隙位错环相互作用分子动力学模拟[J]. 原子能科学技术, 2021, 55(7): 1210-1218.
[14]	张琦, 顾汉洋, 肖瑶, 杨珏, 朱俊志. 5×5螺旋十字型棒束组件阻力与交混特性实验研究[J]. 原子能科学技术, 2021, 55(6): 1060-1066.
[15]	徐哲, 张明辉, 段天应, 付文, 李秋龙, 李培跃. 超临界二氧化碳在印刷电路板式换热器内的流动换热特性研究[J]. 原子能科学技术, 2021, 55(5): 849-855.